For easier operation, higher visibility, and... Furbished GUI. Enhanced new features such as separated graphs, user restrictions, and etc. Max 8 channels to the PC connection at the same time. Basic Features The PC Link system is the software dedicated to a PC for retrieving data outputted from a SANWA digital multimeter (PC series). The operation screen displays graphs in real time to allow you to check changes in measured values (voltage, current, etc.) with ease. Measured data can be saved on a CSV file, so it is easily processed on Excel. The ease of use in a variety of applications from data retrieval, processing and analysis results in its extensive acceptance for business, education and personal use.
Digital kit for basic theory + assembly training Wide range of experiments in conjunction with the PC Measured data can be saved on a CSV file, so it is easily processed on Excel. The ease of use in a variety of applications from data retrieval, processing and analysis results in its extensive acceptance for business, education and personal use
■3-3/4 digits 4000 counts ■Capacitance measurement(40nF up to 100 μF) ■Data hold / Range hold ■Safety cover for the μA・mA ■Tilt stand ■Optical link USB interface KB-USB20(optional) Display : numeral display 4000 Sampling rate : 3 times / sec.
Software : PC Link7 PC Link Cable : KB-USB20 Clip Adapter : CL-13a, CL-14,CL-15a, CL-DG3a, TL-9IC Clamp probe : CL-20D, CL-22AD, CL33DC Temperature probe : T-300PC(PC Link software is necessary.) Holster case : H-70
Analog kit for basic theory + assembly training -Easy to assemble -Break-proof body cover -Solded test leads providing better safety -Portable analog multitester Basic Features ■Drop shock proof taut-band meter The kit is equipped with a taut-band meter that can withstand being dropped onto concrete floor from 1m. ■Battery check ■Meter zero adjuster ■Zero Ohm adjuster ■Protective body cover The included protective cover can also be used as a stand to make it easier to take measurements, and can also be folded behind the meter for mobile use.
After assembly of the training kit, Sanwa guarantees the same levels of performance and accuracy in our self assembly kits as our factory made products. Specification
■Measuring Frequency DC~100kHz ■Ls/Lp/Cs/Cp measurement with sub parameters (D/Q/θ/ESR) ■Automatically selectable L/C/R measurement ■Device Sorting mode ■Optical link USB interface(optional) : LCR-USB ■Data hold, Back ligh
Basic Features OverView The STD5000M is a calibrator with soft touch buttons that can generate a desired DC voltage / current, AC voltage / current, resistance, frequency, etc. with a high degree of accuracy and stability. The STD5000M is with a memory function allowing a broad range of uses for the device. Ranges ■Voltage(DC·AC) : 0〜1000V(6 ranges) ■Current(DC·AC) : 0〜2000mA(6 ranges) ■Resistance1 : 0〜500kΩ(10Ω steps) ■Resistance2 : 24 steps fixed resistance value(4 kinds 6 ranges) ■Hz : 40Hz〜999kHz(5 ranges)
Features ■High accuracy 0.03%(DCV DC mA) Reliable accuracy is achieved by using the standard voltage IC with a constant-temperature bath for the reference voltage and wire wound resistor and metal film resistor with high tolerance and low temperature coefficient for the resistance element. ■Calibrates 6 types of functions With the calibration elements of 6 functions(DCV, ACV, DCA, ACA, OHM, Hz) incorporated, it can be used for calibrating and maintaining the DMM, DPM (digital power meter), circuit tester and industrial instruments. ■Installs 90 (6x15) output memories With 90 (6x15) output memories installed, it is possible to save desired setting. ■User-friendly speedy operability Use of soft-touch push button switches for operation on the panel(except the power switch). Use of semiconductor switches with greater heat resistance and durability for change switches of the circuit, and latch-type relays requiring less electro motive force. ■With overload protection device To enhance security, overload protection in case of low voltage and current generation is performed on the semiconductor circuit, and overload protection in case of medium and high voltage generation(50V or more) is achieved by releasing the output terminal and circuit. Specifications
■Designed for ease of holding to enable stable measurement ■Max/Min value hold ■Auto power off (2min.) (cancelable) ■Fixed installation possible using a commercially available camera tripod ■Contact measurement (optional ENC-3)
Reflective sticker (50stickersX2sheets) : SE-T3 Contact measurement attachment : ENC-3 (contact adapter, contact marker and rim speed ring) contact marker : SE-A30 Rim speed ring : SE-A31
■Suitable for elevator speed measurement of high building ■2 independent display ■Analog output terminal to record measuring data ■2 external hold terminals for remote control ■Remote control by external encoder ■Easy to read LED display ■Auto power off Low battery power alarm
■Small size H28xW48xD14mm ■Suitable for art and musical instrument conservation, and temperature and humidity management for food storage and small space such as car interior ■No battery needed ■Made in Japan
■Easy to carry in a shirt pocket ■Sensor prove can be snapped into a fixed position atop the case ■Data hold, Max / Min hold ■Relative value ■Nonslip sensor holder ■Auto power save (30min.) Pocket size meter but with high accuracy and wide ranges. Sensor / Probes can be all neatly contained and protected within the folding case. Easy to carry in a shirt pocket.